EN 
ES
PT
DE
TR
FRSpecificazione Materiale
Amirplay
 |  |  |
| 48 pipa | connettori | Vite superiore |
 |  |  |
| Base | Foam pipe | striscia |
Main structure 48 pipe:
1.Galvanized steel pipe Q195, diameter 48, thickness ≥ 2.5mm, confirm to BS 1387-1985.
2.Enhance corrosion resistance and extend service life through hot dip galvanizing process.
3.The overall frame unit area( per square meter) load capacity is not less than 150kgs
| Galvanized steel pipe material | ||||||||||
| Parametri chimichi | Puntu di rendiment | A forza tensile | Elongazione | Test di curvatura a freddo | ||||||
| Dimensione di Pipa | INNÒ. | C | Mn | Si | S | P | mpa | mpa | 5% | passà |
| 60 * 2.5mm | Q195 | 0.08 | 0.3 | 0.19 | 0.033 | 0.03 | 195 | 365 | 22 | passà |
| 48 * 2 mm | Q195 | 0.08 | 0.3 | 0.19 | 0.033 | 0.03 | 195 | 365 | 22 | passà |
| 32 * 2.5mm | Q195 | 0.08 | 0.3 | 0.19 | 0.033 | 0.03 | 195 | 365 | 22 | passà |
| 38 * 2.5mm | Q195 | 0.08 | 0.3 | 0.19 | 0.033 | 0.03 | 195 | 365 | 22 | passà |
| 114 * 2 mm | Q235 | 0.14 | 0.2 | 0.27 | 0.028 | 0.04 | 235 | 400 | 27 | passà |
Connectors：Equal path multi-pass
They are all made of ductile iron die-casting with a minimum thickness 3.5mm, M10 threaded hole thickness of 10mm.Surface powder coating treatment, high strength compression (not less than 8.8) screws, inner diameter 40 to 50mm, can effectively connect galvanized pipe we with an outer diameter of 48mm.
TOP screw:
304 stainless steel tighten hexagon socket M10 screw with concave end jackscrew, strength not less than 8.8.
Base:
PA(nylon) chassis diameter is more than 100mm, blind hole depth is more than 45mm.
Foam pipe:
Made of EPE ( pearl cotton), the surface is made of granular PVC, which is an environmentally friendly soft composite material.Dimensions: outer diameter 85mm, inner diameter 55mm, wall thickness 15mm, length 2500mm, The surface is granular which is more flexible than ordinary guarantee tubes, has better turning and tensile properties and is flame retardant.
Striscia:
The Nylon tie is made of UL- approved nylon-66(Nylon 66) material injection molding, with a fire rating of 94V-2. It has good acid resistance, corrosion, insulation strong endurance. Operating temperature -20℃ to +80℃.
